Thermal Transfer Ribbon — Grade 22 — PE / PVC / POF Film & Bags
PE / PVC / POF Film & Bags

Thermal Transfer Ribbon — Grade 22

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Printhead-safe backing

Back-coating reduces static and wear so the ribbon protects the thermal printhead at production speed.

02

Puncture and tear

Multi-layer constructions resist sharp corners and pallet-edge abrasion.

03

Recyclability

Mono-material PE and POF structures are easier to route into existing recycling streams.

04

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

05

Cling and tack

Cling level tuned for food wrap or layer-to-layer pallet adhesion.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Transfer Ribbon — Grade 22
Roll width (source)49 + /-2mm
Roll length (source)160mm
Source reference3919109900
DivisionPE / PVC / POF Film & Bags
MaterialPOF / PE / PVC / PO — confirm by grade
FormatRoll stock, centre-folded sheet, tube or finished bag
Shrink conditionsTunnel temperature and dwell time to confirm
Food contactDeclaration issued per grade on request
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

This division covers polyolefin films and finished bags for protection and distribution: POF shrink film, PE stretch and cling film, PVC film, air bubble film and made-up packaging bags. Thermal Transfer Ribbon — Grade 22 is supplied as roll stock or as a finished bag depending on the grade.

Shrink and stretch films behave very differently on a machine. For shrink film we need the tunnel temperature and dwell time; for stretch film the pre-stretch ratio and load type; for bags the filling method and any food-contact requirement.

This page is one of 20 entries in the PE / PVC / POF Film & Bags division. Source facts available for cross-checking: Source catalogue width: 49 + /-2mm; Source catalogue roll length: 160mm; Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
latex condoms 1.) stype:plain/dotted/ribbed color:natural/pink/green flavor:natual/fruit/rose/vanilla/chocolate pack: foil shape:square/rectangle box:bulk/3pack/10pack/12pack or as per your requirments MOQ:100000pcs 2. Condom size Size Length 160mm 170mm 180mm 190mm Width 49+/-2mm 52+/-2mm 53+/-2mm 54+/-2mm Thickness Ultra Thin 0.04mm Normal 0.06-0.08mm 3. Data Material natural latex Packing In bulk, 3pcs/box, 6pcs/box, 12pcs/box, 24pcs/box etc Inner pack Square pack with Aluminum foil on both sides. Shape Straight, teat ended Type Plain,Ribbed,Dotted,Ribbed&Dotted Length 170mm-185mm Width 49mm/52mm/55mm( 2mm) Wall thickness 0.06mm 0.015 Volume of lubricant 500 mg Fragrance Fruit 4. Instruction: 1)Take out the condom from the foil pack carefully to avoid slit it with a fingernail. 2)Be sure to squeeze the air out of the teat end. 3)Place the condom against the tip of erect penis and carefully roll the sides down the shaft of the condom. 4)Keep the condom in place on the penis unit after intercourse or ejaculation, and then move it out carefully. 5)Please deal well with the condom which had been used in order to keep sanitary, you should pack the condom with napkin and throw it into garbage bins. 5. Note: 1.Important: Each condom only can be used once . 2.Condoms should be stored below 25 centigrade degree in the shade drying, and should be placed in the packaging, so as to avoid condoms by mechanical damage or sunlight.
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Pallet unitising

Warehouse and export pallet stabilisation with PE stretch film.

02

Food cling wrap

Household and catering cling film for fresh food coverage.

03

Protective packaging

Bubble film and air cushion for fragile goods and e-commerce parcels.

04

Garment and textile bags

Poly bags for apparel, linens and retail packaging.

05

Industrial liners

Carton and drum liners for powders, granules and components.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Why does shrink film burn or wrinkle in the tunnel?

Usually the tunnel is too hot or the dwell too long for the gauge. Send the gauge, tunnel temperature, conveyor speed and pack size and we will suggest a shrinkage curve that matches.

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Get a Quote

Request a quotation and sample for Thermal Transfer Ribbon — Grade 22

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request