Seal strength
Bag seals are specified for the filling weight and drop conditions.

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.
Quotation within 24 hours · No obligation · Samples available · Technical data on request
Bag seals are specified for the filling weight and drop conditions.
PE stretch film holds load integrity at high pre-stretch ratios, reducing film per pallet.
TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.
Bubble film grades protect glass, electronics and spare parts in transit.
Cling level tuned for food wrap or layer-to-layer pallet adhesion.
Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.
| Source reference | AEC_PE_010 |
|---|---|
| Division | PE / PVC / POF Film & Bags |
| Material | POF / PE / PVC / PO — confirm by grade |
| Format | Roll stock, centre-folded sheet, tube or finished bag |
| Shrink conditions | Tunnel temperature and dwell time to confirm |
| Food contact | Declaration issued per grade on request |
| Core ID | 3" (76 mm) or 6" (152 mm), confirmed at order |
| Roll build | Set to your unwind tension and shipping limits |
| Packing | Individual reel wrap, export carton, palletised |
| Documentation | TDS · lot COA · MSDS · packing list · export docs |
| MOQ & lead time | Confirmed in the quotation; depends on grade and width |
Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
This division covers polyolefin films and finished bags for protection and distribution: POF shrink film, PE stretch and cling film, PVC film, air bubble film and made-up packaging bags. PE Stretch Wrap Film — Grade 01 is supplied as roll stock or as a finished bag depending on the grade.
Shrink and stretch films behave very differently on a machine. For shrink film we need the tunnel temperature and dwell time; for stretch film the pre-stretch ratio and load type; for bags the filling method and any food-contact requirement.
This page is one of 20 entries in the PE / PVC / POF Film & Bags division. Source facts available for cross-checking: Source model reference: AEC_PE_010. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.
Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.
Household and catering cling film for fresh food coverage.
Warehouse and export pallet stabilisation with PE stretch film.
Multipacks, boxes, books, cosmetics and gift sets.
Collation shrink for beverages, cans and multipacks.
Carton and drum liners for powders, granules and components.
Usually the tunnel is too hot or the dwell too long for the gauge. Send the gauge, tunnel temperature, conveyor speed and pack size and we will suggest a shrinkage curve that matches.
Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.
Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.
Yes. Provide width, length, seal type, printing requirements, filling weight and whether the bag needs a hang hole, zipper or euro slot.

Machine- and transverse-direction shrinkage are balanced to avoid dog-ears and distortion after the tunnel.

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

Multi-layer constructions resist sharp corners and pallet-edge abrasion.
Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.
Quotation within 24 hours · No obligation · Samples available · Technical data on request