Recyclability
Mono-material PE and POF structures are easier to route into existing recycling streams.

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.
Quotation within 24 hours · No obligation · Samples available · Technical data on request
Mono-material PE and POF structures are easier to route into existing recycling streams.
Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.
TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.
Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.
A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.
Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.
| Source reference | AEC_PEFILM_010 |
|---|---|
| Division | PE / PVC / POF Film & Bags |
| Material | POF / PE / PVC / PO — confirm by grade |
| Format | Roll stock, centre-folded sheet, tube or finished bag |
| Shrink conditions | Tunnel temperature and dwell time to confirm |
| Food contact | Declaration issued per grade on request |
| Core ID | 3" (76 mm) or 6" (152 mm), confirmed at order |
| Roll build | Set to your unwind tension and shipping limits |
| Packing | Individual reel wrap, export carton, palletised |
| Documentation | TDS · lot COA · MSDS · packing list · export docs |
| MOQ & lead time | Confirmed in the quotation; depends on grade and width |
Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
This division covers polyolefin films and finished bags for protection and distribution: POF shrink film, PE stretch and cling film, PVC film, air bubble film and made-up packaging bags. PVC Cling Film — Grade 02 is supplied as roll stock or as a finished bag depending on the grade.
Shrink and stretch films behave very differently on a machine. For shrink film we need the tunnel temperature and dwell time; for stretch film the pre-stretch ratio and load type; for bags the filling method and any food-contact requirement.
This page is one of 20 entries in the PE / PVC / POF Film & Bags division. Source facts available for cross-checking: Source model reference: AEC_PEFILM_010. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.
Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.
Collation shrink for beverages, cans and multipacks.
Bubble film and air cushion for fragile goods and e-commerce parcels.
Multipacks, boxes, books, cosmetics and gift sets.
Poly bags for apparel, linens and retail packaging.
Warehouse and export pallet stabilisation with PE stretch film.
Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.
Usually the tunnel is too hot or the dwell too long for the gauge. Send the gauge, tunnel temperature, conveyor speed and pack size and we will suggest a shrinkage curve that matches.
Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.
Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Machine- and transverse-direction shrinkage are balanced to avoid dog-ears and distortion after the tunnel.

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

Bag seals are specified for the filling weight and drop conditions.
Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.
Quotation within 24 hours · No obligation · Samples available · Technical data on request