Thermal Lamination Film — Grade 09 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 09

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Print protection

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.

02

Bond strength

Coating weight and adhesive chemistry are matched to the ink film and substrate to avoid delamination.

03

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

04

Samples before commitment

Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.

05

Brand security

Holographic and laser patterns can be customised and combined with tear tape for tamper evidence.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 09
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 09 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Instructions for Soft-Touch Film is designed to offer soft tactility velvet touch to printed substrate. It can be attached to any surface smooth paper printed by various printing types. Its velvet surface is suitable for UV spot coating, foil stamping to enhance its aesthetic look. General Applications ·High-value Packaging ·User manuals ·Promotion stuff ·Leaflets Usage Method 1) for laminating soft-touch film Laminating temperature: 120 ℃ ~130 ℃ 2) for glue-coating soft-touch film Check the gloss surface energy to insure that it is suitable for glue coating. Choose suitable glue and flatten the film to get perfect attaching effect. Attention Film handling It is strictly prohibited to roll film with tilting angle or make the film contact with hard objects. Storage conditions The film should be overhead laying and stored in ventilating and dry place with temperature below 35 ℃ and relative humidity lower than 60%; Keep the film away from sources of heat. Shelf life 6 months Surface treatment The surface energy may decrease because of inappropriate storage or out of shelf-life. Corona treatment can be employed to make the surface suitable for use. Technical Data items data Testing method Thickness / m 18 5% GB/T 6672 White spot / 33cm*33cm <=8 ( <=0.3mm ) ; <=5 ( 0.3-0.5mm ) ; <=0.2 ( >=0.5mm ) Count with naked eyes after the soft-touch film attached to paper Wear-resistance No damage to coating Loading 125g , abrasing 60 times with soft testing rubber Ethyl alcohol durability No damage to coating Loading 75g,abrasing 200 times with Alcohol cotton covered metal Tensile strength / Mpa MD>=95 GB/T1040.3-06 TD>=190 Breaking elongation / % MD<=150 GB/T1040.3-06 TD<=30 Adhension No peeling
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

High-barrier food packs

PVDC-coated webs for meat, cheese, snacks and dried foods.

02

Paper lamination

Posters, menus, maps and documents needing washable, tear-resistant surfaces.

03

Anti-counterfeit labels

Holographic films for brand protection, tax stamps and security seals.

04

Print finishing

Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.

05

Flexible laminates

Coated webs as the barrier or print layer in multi-layer pouch structures.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Which do I need: pre-coated or wet lamination?

Pre-coated (thermal) film is cleaner, has no drying step and suits most modern laminators. Wet lamination can be more economical on very long runs and gives a different bond profile. Machine capability decides it.

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 09

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request