Samples before commitment
Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.
Quotation within 24 hours · No obligation · Samples available · Technical data on request
Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.
A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.
A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.
Check metallic inks, varnishes and high ink coverage, which are the usual causes of bonding failure.
TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.
Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.
| Source reference | AEC_BOPP_THERMALFILM_003 |
|---|---|
| Division | Coated & Lamination Film |
| Base web | BOPP, BOPET or paper — confirm by grade |
| Coating | EVA / PVDC / acrylic / holographic — confirm by grade |
| Bonding | Thermal (pre-coated) or wet lamination; nip temperature to confirm |
| Sidedness | One side, with treatment level confirmed per order |
| Core ID | 3" (76 mm) or 6" (152 mm), confirmed at order |
| Roll build | Set to your unwind tension and shipping limits |
| Packing | Individual reel wrap, export carton, palletised |
| Documentation | TDS · lot COA · MSDS · packing list · export docs |
| MOQ & lead time | Confirmed in the quotation; depends on grade and width |
Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 04 belongs to our Coated & Lamination Film division.
The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.
This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source model reference: AEC_BOPP_THERMALFILM_003. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.
Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.
Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.
Holographic films for brand protection, tax stamps and security seals.
Posters, menus, maps and documents needing washable, tear-resistant surfaces.
PVDC-coated webs for meat, cheese, snacks and dried foods.
Cosmetics, spirits, electronics and gift packaging requiring a high-gloss or soft-touch finish.
Custom patterns are possible for volume orders and normally involve a shim / origination charge. Send the artwork intent and annual volume so we can confirm feasibility and tooling.
Pre-coated (thermal) film is cleaner, has no drying step and suits most modern laminators. Wet lamination can be more economical on very long runs and gives a different bond profile. Machine capability decides it.
Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.
Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.
Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.
Quotation within 24 hours · No obligation · Samples available · Technical data on request