Thermal Lamination Film — Grade 10 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 10

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Brand security

Holographic and laser patterns can be customised and combined with tear tape for tamper evidence.

02

Optical finish

Gloss, matte, silk and holographic effects are available without a second converting pass.

03

Bond strength

Coating weight and adhesive chemistry are matched to the ink film and substrate to avoid delamination.

04

Documents that clear customs

TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.

05

Clean unwind

Controlled blocking and static behaviour keep sheet-fed and reel-fed laminators running cleanly.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 10
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 10 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Soft-touch film with EVA adhesive coating Tactile membrane (SoftTouch Film), is a latest research results from the European BOPP laminating film special. This patented technology has the film factory, only production of BOPP film products, and has over 20 years of professional experience. Is a surface with special velvet smooth, delicate touch of BOPP matte film. Categories Folding Depending on the coating method can be divided into CM017WE not touch the film adhesive film (Wet), CM035EA pre-coated hot melt adhesive film (Thermal), as well as pre-coated hot melt adhesive film with digital printing three. Feature Features contrast fold Tactile membrane (SoftTouch Film) compared with the general Asian film, tactile membrane (SoftTouch Film), has the following four characteristics: 1. has a good abrasion (ANTI-SCRATCH) performance; 2. Excellent color, hue is not lost after the fit, the more bright and pastel on black and red with dark field or large full version; 3. There is a special smooth as velvet, delicate touch; 4. high fog, there are more special matt effect. Compared with the new touch membrane touch paper The new film and paper touch after touch fitting can be achieved with paper-haptic effects; but in the adaptability and characteristic features, can bring more results. Include the following: 1. The new film can touch any surface with a smooth fit paper, coated paper or uncoated paper, culture paper or long staple fibers cultural paper, colored paper or printing paper, which can be used as basis for the composite end paper, 2. The new tactile membrane attached together before the end of the paper can be in any way an ordinary four-color offset printing, flexo, gravure, letterpress, screen printing or digital inkjet printing, there is n
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

High-barrier food packs

PVDC-coated webs for meat, cheese, snacks and dried foods.

02

Luxury cartons

Cosmetics, spirits, electronics and gift packaging requiring a high-gloss or soft-touch finish.

03

Book and magazine covers

Thermal lamination of covers, jackets and premium brochures.

04

Flexible laminates

Coated webs as the barrier or print layer in multi-layer pouch structures.

05

Print finishing

Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Can the hologram pattern be customised?

Custom patterns are possible for volume orders and normally involve a shim / origination charge. Send the artwork intent and annual volume so we can confirm feasibility and tooling.

Which do I need: pre-coated or wet lamination?

Pre-coated (thermal) film is cleaner, has no drying step and suits most modern laminators. Wet lamination can be more economical on very long runs and gives a different bond profile. Machine capability decides it.

Why does lamination peel off metallic ink?

Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 10

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request