Thermal Lamination Film — Grade 12 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 12

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Print protection

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.

02

Clean unwind

Controlled blocking and static behaviour keep sheet-fed and reel-fed laminators running cleanly.

03

Bond strength

Coating weight and adhesive chemistry are matched to the ink film and substrate to avoid delamination.

04

Ink compatibility

Check metallic inks, varnishes and high ink coverage, which are the usual causes of bonding failure.

05

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 12
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 12 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Bopp Thermal lamination Films Environmentally friendly: It is environmentally friendly,nonhazardous to healty and safe to use no toxic gases or voatile content is emitted.Safety in laminating process ad no solvent based adhesive is used. High function: Compared with other solvent lamination,our film is better in clarity and bonding.Strong ability of absorbing power.It prevents lamination from being pressed,bubbled and shredded off easily.Matt thermal lamination film is good for spot UVand hot stamping. Easy handing: It is easy to operate once the required temperatures is met and no special technique required. Effcient and energry-saving: Production costs it reduced substantially ad there is no film wastage,mixture of adhesive solvent,and ni UV heating lamp is required. Adaptable to diffeerent kinds of machines: This film is recommended to be used in dry laminator.Small adjustments need to be made to the machine if the film is used in wet laminator. SPECIFICATION&PARAMENTER SPECIFICATION GLOSS GLOSS GLOSS GLOSS MATT MATT MATT THICKNESS TOTAL 24 25 27 29 26 28 30 BASE 12 15 17 17 15 17 18 ADHESIVE 12 10 10 12 11 11 12 WIDTH(MM) 360 390 440 540 590 780 880 1080 1320 (or as per cuestomer s request) LENGTH(M MAX:5000 PAPER CORE 25.4MM(1 inch) 58MM(2 ubcg) 76MM(3 inch) MD:2.4*106 dyne/cm TENSILE MD:2.4*106 dyne/cm CD:5.3*106 dyne/cn Process Requirement: Equipment for laminating film:dry and wet film laminartor. Temperature:Normal:85-100℃ Special:100-110℃ Roller pressure:10-18Mpa Speed:8-20m/min Remarks:Special laminatioins refer to those with thicker ink,solid color,high moisture content and bigger size paper. Application manual: 1.Adjust roller pressure and temperatu
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Paper lamination

Posters, menus, maps and documents needing washable, tear-resistant surfaces.

02

Luxury cartons

Cosmetics, spirits, electronics and gift packaging requiring a high-gloss or soft-touch finish.

03

Flexible laminates

Coated webs as the barrier or print layer in multi-layer pouch structures.

04

Anti-counterfeit labels

Holographic films for brand protection, tax stamps and security seals.

05

High-barrier food packs

PVDC-coated webs for meat, cheese, snacks and dried foods.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Which do I need: pre-coated or wet lamination?

Pre-coated (thermal) film is cleaner, has no drying step and suits most modern laminators. Wet lamination can be more economical on very long runs and gives a different bond profile. Machine capability decides it.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Why does lamination peel off metallic ink?

Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 12

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request