Thermal Lamination Film — Grade 16 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 16

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

02

Ink compatibility

Check metallic inks, varnishes and high ink coverage, which are the usual causes of bonding failure.

03

Bond strength

Coating weight and adhesive chemistry are matched to the ink film and substrate to avoid delamination.

04

Clean unwind

Controlled blocking and static behaviour keep sheet-fed and reel-fed laminators running cleanly.

05

Print protection

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 16
Roll width (source)200 390 440 540 590 780 880 1330 1900 3mm
Roll length (source)2000, 3000 M 5%
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 16 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source catalogue width: 200 390 440 540 590 780 880 1330 1900 3mm; Source catalogue roll length: 2000, 3000 M 5%; Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Description of Products: Featured by non toxic,pollution free,high transparency and gloss,low static,wear resistance,long ageing of corona,few defects and good opening,this product is mainly used for the composition of printing,bag making,adhesive tape production and other base materials It is widely used for clean and dust free workshop in the areas of clothing and foodstuff packaging It is provided with strong powder absorption and can blister and film release after being concaved or protruded Matte lamination film is also suitable for partially UV glazing after film laminating,thermo printing,screen printing and frosted processes This prodct is easy to operate Once the temperature of hot roller meets the requirements,film laminating can be done at any time,with no need of professional skill. Operation Parameters: Film laminating equipment:dry or wet type film laminator Temperature of hot roller:General printing materials:85~100 C Special printing materials:100~110 C Pressure:10~18Mpa Speed:8~50m/min Film specification Specification BOPP-20glossy BOPP-25glossy BOPP-27glossy BOPP-23matte BOPP-27matte BOPP-30matte Thickness( ) Total 20 25 27 23 27 30 BOPP 12 12 15 15 15 18 EVA 8 13 12 8 12 12 Weight M2/kg 54.6 43.22 40.1 47.03 41.35 37.37 g/m2 18.36 23.1 25 21.26 24.18 26.76 Width 200 390 440 540 590 780 880 1330 1900 3mm Upon customer s desire Length 2000,3000 M 5% Paper core Inside paper core 25.4mm 50.8mm 63.5mm 76mm Spec.: 1.) Jumbo roll sizes: Total Thickness: 20-33UM (Mic.) ,such as: 18,20,22,25,28,30,32,35 microns Basic film thickness: 10,12,15,18,20 UM (Mic.) Width :325-1200MM Length:3000M (2000M,2500M,4000M).Inner core:76MM ,152MM
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

High-barrier food packs

PVDC-coated webs for meat, cheese, snacks and dried foods.

02

Luxury cartons

Cosmetics, spirits, electronics and gift packaging requiring a high-gloss or soft-touch finish.

03

Book and magazine covers

Thermal lamination of covers, jackets and premium brochures.

04

Flexible laminates

Coated webs as the barrier or print layer in multi-layer pouch structures.

05

Print finishing

Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Can the hologram pattern be customised?

Custom patterns are possible for volume orders and normally involve a shim / origination charge. Send the artwork intent and annual volume so we can confirm feasibility and tooling.

Why does lamination peel off metallic ink?

Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 16

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request