Thermal Lamination Film — Grade 18 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 18

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Print protection

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.

02

Brand security

Holographic and laser patterns can be customised and combined with tear tape for tamper evidence.

03

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

04

Optical finish

Gloss, matte, silk and holographic effects are available without a second converting pass.

05

Clean unwind

Controlled blocking and static behaviour keep sheet-fed and reel-fed laminators running cleanly.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 18
Thickness (source)20-35µm
Roll width (source)300~1800mm
Roll length (source)200~3000m
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 18 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source catalogue thickness: 20-35µm; Source catalogue width: 300~1800mm; Source catalogue roll length: 200~3000m; Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Digital Thermal Laminating Film (Gloss & Matt) *Material Surface layer: BOPP Glue layer: EVA adhesive *Specification Thickness : 20-35Mic *Material Surface layer: BOPP Glue layer: EVA adhesive *Specification Thickness : 20-35mic Width : 300~1800mm Length : 200~3000m Paper core : 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches) Bonding : Less than 2 *process parameter: Equipment for thermal film : Dry and wet film laminator Lamination temperature : 95~105c Roller pressure : 10-20mpa Speed : 8-20 m/min *directions for using BOPP thermal laminating film: Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines. When using the film for the first time or do other treatment, try a small volume before mass laminating. Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder. Make sure put the material in a low-temperature, dry place. 35mic Width : 300~1800mm Length : 200~3000m Paper core : 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches) Bonding : Less than 2 *process parameter: Equipment for thermal film : Dry and wet film laminator Lamination temperature : 95~105c Roller pressure : 10-20mpa Speed : 8-20 m/min *directions for using BOPP thermal laminating film: Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines. When using the film for the first time or do other treatment, try a small volume before mass laminating. Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder. Make sure put the material in a low-temperature, dry place. Spec.: 1.) Jumbo roll sizes: T
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Paper lamination

Posters, menus, maps and documents needing washable, tear-resistant surfaces.

02

Anti-counterfeit labels

Holographic films for brand protection, tax stamps and security seals.

03

Print finishing

Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.

04

Flexible laminates

Coated webs as the barrier or print layer in multi-layer pouch structures.

05

Book and magazine covers

Thermal lamination of covers, jackets and premium brochures.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Why does lamination peel off metallic ink?

Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.

Can the hologram pattern be customised?

Custom patterns are possible for volume orders and normally involve a shim / origination charge. Send the artwork intent and annual volume so we can confirm feasibility and tooling.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 18

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request