Thermal Lamination Film — Grade 23 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 23

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Print protection

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.

02

Barrier performance

PVDC (K-film) grades sharply reduce oxygen and moisture transmission for longer shelf life.

03

Bond strength

Coating weight and adhesive chemistry are matched to the ink film and substrate to avoid delamination.

04

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

05

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 23
Thickness (source)15µm BOPP film + 10µm EVA glue
Roll width (source)300mm~1800mm
Roll length (source)200m~3000m
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 23 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source catalogue thickness: 15µm BOPP film + 10µm EVA glue; Source catalogue width: 300mm~1800mm; Source catalogue roll length: 200m~3000m; Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Application BOPP thermal laminating film is a product which the BOPP film coated a layer of EVA glue.It can be used for wet or dry lamination machine.After heated and pressure of the roller,the film and the printing sheet will be glued together. Thermal laminating film is used for cover of books,magazines,hand-bags,all kinds of packing box,advertisment and so on in the printing industry. Speciation of 25 mic lamination film Thickness: 15mic BOPP film+10mic EVA glue Width: 300mm~1800mm Length: 200m~3000m Paper core(inner): 1inch(25.4mm), 2.25inch(58mm), 3inch(76mm) Process Parameter 1.Equipment:dry or wet film laminator 2.Temperature:Normal:85-100 degree Special:100-110 degree 3.Roller pressure:10-18Mpa 4.Speed:8-50m/min 5.Remarks:Special laminations refer to those with thicker ink,solid color,high moisture content and bigger size paper. Package 1.One roll per carton for 76mm core 2.Six rolls per carton for 25mm core 3.Pack in wood or plastic pallet(if you need) Spec.: 1.) Jumbo roll sizes: Total Thickness: 20-33UM (Mic.) ,such as: 18,20,22,25,28,30,32,35 microns Basic film thickness: 10,12,15,18,20 UM (Mic.) Width :325-1200MM Length:3000M (2000M,2500M,4000M).Inner core:76MM ,152MM 2.) Mini-roll sizes ( Inner core: 1",1.5", 2.0" ): Total Thickness :20-33UM (Mic.) Film thickness: 10,12,15,18,20 UM (Mic.) Width :325-1200MM Type:included BOPET thermal film (Polyester thermal lamination film with EVA),BOPA thermal film (nylon thermal lamination film with EVA), bopp thermal film (Polypropylene thermal lamination film with EVA) Length :100M,120M,150M,200M Inner core :1.5",1.8", 2.0",3" (Inches) 3.) SOFT VELVET BOPP THERMAL LAMINATING FILM, THICKNESS: 30MIC. (17MIC LASER BOPP 13 MIC EVA) a. Laser BOPP thermal ( opaque,non-transparent),t
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Paper lamination

Posters, menus, maps and documents needing washable, tear-resistant surfaces.

02

Book and magazine covers

Thermal lamination of covers, jackets and premium brochures.

03

Anti-counterfeit labels

Holographic films for brand protection, tax stamps and security seals.

04

Luxury cartons

Cosmetics, spirits, electronics and gift packaging requiring a high-gloss or soft-touch finish.

05

Print finishing

Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can the hologram pattern be customised?

Custom patterns are possible for volume orders and normally involve a shim / origination charge. Send the artwork intent and annual volume so we can confirm feasibility and tooling.

Which do I need: pre-coated or wet lamination?

Pre-coated (thermal) film is cleaner, has no drying step and suits most modern laminators. Wet lamination can be more economical on very long runs and gives a different bond profile. Machine capability decides it.

Why does lamination peel off metallic ink?

Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 23

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request