Thermal Lamination Film — Grade 25 — Coated & Lamination Film
Coated & Lamination Film

Thermal Lamination Film — Grade 25

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

02

Brand security

Holographic and laser patterns can be customised and combined with tear tape for tamper evidence.

03

Print protection

A clear coating guards against scuffing, fingerprints and fading in transit and on shelf.

04

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

05

Clean unwind

Controlled blocking and static behaviour keep sheet-fed and reel-fed laminators running cleanly.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Thermal Lamination Film — Grade 25
Thickness (source)20-33UM (µm.), such as: 18, 20, 22, 25, 28, 30, 32, 35 µm
Roll width (source)325-1200MM
Roll length (source)3000M (2000M, 2500M, 4000M).Inner core: 76MM, 152MM
Source reference3919109900
DivisionCoated & Lamination Film
Base webBOPP, BOPET or paper — confirm by grade
CoatingEVA / PVDC / acrylic / holographic — confirm by grade
BondingThermal (pre-coated) or wet lamination; nip temperature to confirm
SidednessOne side, with treatment level confirmed per order
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Coated and lamination films add a functional layer to a base web: an EVA adhesive for thermal lamination, PVDC for barrier, acrylic for print protection and gloss, or a holographic / specialty finish for brand security. Thermal Lamination Film — Grade 25 belongs to our Coated & Lamination Film division.

The right choice depends on the substrate you bond to and the temperature your laminator can hold. We ask for the paper or film grade, machine speed, nip temperature and whether the job is sheet-fed or reel-fed before fixing the coating weight and adhesive type.

This page is one of 45 entries in the Coated & Lamination Film division. Source facts available for cross-checking: Source catalogue thickness: 20-33UM (µm.), such as: 18, 20, 22, 25, 28, 30, 32, 35 µm; Source catalogue width: 325-1200MM; Source catalogue roll length: 3000M (2000M, 2500M, 4000M).Inner core: 76MM, 152MM; Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
BOPP Thermal Lamination Film (glossy and matte lamination) BOPPThermal Lamination Film (glossy/matte) which were BOPP clear film coated with EVA glue. Spec.: 1.) Jumbo roll sizes: Total Thickness: 20-33UM (Mic.) ,such as: 18,20,22,25,28,30,32,35 microns Basic film thickness: 10,12,15,18,20 UM (Mic.) Width :325-1200MM Length:3000M (2000M,2500M,4000M).Inner core:76MM ,152MM 2.) Mini-roll sizes ( Inner core: 1",1.5", 2.0" ): Total Thickness :20-33UM (Mic.) Film thickness: 10,12,15,18,20 UM (Mic.) Width :325-1200MM Type:included BOPET thermal film (Polyester thermal lamination film with EVA),BOPA thermal film (nylon thermal lamination film with EVA), bopp thermal film (Polypropylene thermal lamination film with EVA) Length :100M,120M,150M,200M Inner core :1.5",1.8", 2.0",3" (Inches) 3.) SOFT VELVET BOPP THERMAL LAMINATING FILM, THICKNESS: 30MIC. (17MIC LASER BOPP 13 MIC EVA) a. Laser BOPP thermal ( opaque,non-transparent),thickness: 20Mic. (12Mic BOPP laser+8Mic EVA) b. Laser BOPP thermal ( clear/transparent),thickness: 28Mic. (18Mic BOPP laser+10Mic EVA) c. Soft-Velvet Bopp thermal ,thickness: 30Mic.(17Mic BOPP laser+13Mic EVA) d. Laser BOPP thermal normal Applications:Laminate the surface of Books, catalogs, samples, posters, printed paper, Food, medicines, cosmetics, gifts, wine boxes and other packaging film ,Drawings, documents, ads, pictures, display boards, etc. BOPP/BOPET/MPP/MPET THERMAL LAMINATING FILM, BOPP or PET base film and EVA adhesive, used in Printed matter (Books, magazines, leaflet, poster, etc.), Packaging (Crates or boxes for liquor, food, beverage, medicine, cosmetics and other daily consumer products, etc.) & Digital printing: (Photos, documents, billboards, etc.). Technology data
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Flexible laminates

Coated webs as the barrier or print layer in multi-layer pouch structures.

02

Anti-counterfeit labels

Holographic films for brand protection, tax stamps and security seals.

03

High-barrier food packs

PVDC-coated webs for meat, cheese, snacks and dried foods.

04

Book and magazine covers

Thermal lamination of covers, jackets and premium brochures.

05

Print finishing

Pre-coated film as a base for hot stamping, embossing and spot effects after lamination.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Can the hologram pattern be customised?

Custom patterns are possible for volume orders and normally involve a shim / origination charge. Send the artwork intent and annual volume so we can confirm feasibility and tooling.

Which do I need: pre-coated or wet lamination?

Pre-coated (thermal) film is cleaner, has no drying step and suits most modern laminators. Wet lamination can be more economical on very long runs and gives a different bond profile. Machine capability decides it.

Why does lamination peel off metallic ink?

Metallic inks and heavy varnish layers reduce adhesive wetting. We normally suggest a higher coating weight, slower line speed or a primer, and a trial on the actual printed sheet before the run.

Get a Quote

Request a quotation and sample for Thermal Lamination Film — Grade 25

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request