BOPP触感膜 预涂膜 — 涂布膜与预涂膜
涂布膜与预涂膜

BOPP触感膜 预涂膜

3919109900

按产线条件确认规格后供货:厚度、幅宽、卷长、卷芯与表面处理均可指定。

可提供 TDS / COA / MSDS 支持寄样试机

24 小时内报价 · 免费咨询 · 可寄样 · 提供技术数据表

选型要点

关键特性

01

防伪与品牌

全息与镭射图案可定制,并可配合拆封拉线实现防拆封。

02

表面效果

可做光、哑、丝光与全息效果,无需二次加工。

03

复合牢度

涂布量与胶系按油墨层、基材匹配,避免起膜脱层。

04

随货单证齐全

每批可提供 TDS、批次 COA、MSDS、装箱单与出口单证;适用等级可提供食品接触声明。

05

放卷稳定

控制粘连与静电,让单张与卷材覆膜机走料顺畅。

技术参数

技术规格

标注「源站」的数值来自原产品目录,其余为订货时可确定的项目;最终以随报价提供的数据表为准。

技术规格 — BOPP触感膜 预涂膜
源站型号3919109900
所属事业部涂布膜与预涂膜
基膜BOPP、BOPET 或纸张,按等级确认
涂层EVA / PVDC / 丙烯酸 / 全息,按等级确认
复合方式预涂热复合或即涂湿复合;压合温度待确认
涂布面单面涂布,处理值按订单确认
卷芯内径3"(76 mm)或 6"(152 mm),下单时确认
卷径与卷长按放卷张力与运输限制确定
包装方式单卷包装、出口纸箱、托盘加固
随货文件TDS · 批次 COA · MSDS · 装箱单 · 出口单证
起订量与交期报价时确认,取决于等级与幅宽

页面参数为源站目录中的参考值。最终厚度、表面处理、卷装参数与公差,以报价时提供的技术数据表为准。

产品说明

关于这个等级

涂布与预涂膜是在基膜上增加功能层:EVA 胶层用于热覆膜、PVDC 提供阻隔、丙烯酸层保护印刷并提升光泽,全息或特种涂层用于品牌防伪。BOPP触感膜 预涂膜 属于涂布膜与预涂膜事业部。

选型取决于被复合的基材与覆膜机可稳定保持的温度。确定涂布量与胶种之前,我们会询问纸张或薄膜等级、机速、压合温度,以及是单张还是卷材走料。

涂布膜与预涂膜事业部下共 45 个条目,本页为其中之一。可核对的源站信息:源站型号:3919109900。页面参数为源站目录中的参考值。最终厚度、表面处理、卷装参数与公差,以报价时提供的技术数据表为准。

所有产品均可提供技术数据表(TDS)、批次检测报告 / COA、MSDS 与出口单证;常规等级支持寄样。价格按规格、数量与交期核算,请通过上方按钮询价。

查看源站原始技术说明(中文原文)
Soft-touch film with EVA adhesive coating Tactile membrane (SoftTouch Film), is a latest research results from the European BOPP laminating film special. This patented technology has the film factory, only production of BOPP film products, and has over 20 years of professional experience. Is a surface with special velvet smooth, delicate touch of BOPP matte film. Categories Folding Depending on the coating method can be divided into CM017WE not touch the film adhesive film (Wet), CM035EA pre-coated hot melt adhesive film (Thermal), as well as pre-coated hot melt adhesive film with digital printing three. Feature Features contrast fold Tactile membrane (SoftTouch Film) compared with the general Asian film, tactile membrane (SoftTouch Film), has the following four characteristics: 1. has a good abrasion (ANTI-SCRATCH) performance; 2. Excellent color, hue is not lost after the fit, the more bright and pastel on black and red with dark field or large full version; 3. There is a special smooth as velvet, delicate touch; 4. high fog, there are more special matt effect. Compared with the new touch membrane touch paper The new film and paper touch after touch fitting can be achieved with paper-haptic effects; but in the adaptability and characteristic features, can bring more results. Include the following: 1. The new film can touch any surface with a smooth fit paper, coated paper or uncoated paper, culture paper or long staple fibers cultural paper, colored paper or printing paper, which can be used as basis for the composite end paper, 2. The new tactile membrane attached together before the end of the paper can be in any way an ordinary four-color offset printing, flexo, gravure, letterpress, screen printing or digital inkjet printing, there is n
应用场景

典型应用

以下为该类材料的常见用途;具体结构请结合您的灌装、印刷与复合条件确认。

01

高阻隔食品包装

PVDC 涂布膜用于肉制品、奶酪、零食与干制食品。

02

精品纸盒

化妆品、酒类、电子与礼盒的高光或触感效果。

03

书刊封面

封面、护封与精装宣传册的热覆膜。

04

软包装复合

涂布膜作为多层袋结构中的阻隔层或印刷层。

05

印后加工

预涂膜作覆膜后烫金、压纹与局部效果的基材。

询价准备

提供这些,报价一次到位

  • 目标厚度与公差
  • 分切幅宽与卷长
  • 卷芯内径与最大卷径
  • 印刷、复合或热封工艺
  • 最终用途及是否有食品接触要求
  • 月用量或单次订量
  • 目的港与要求交期
咨询该产品
FAQ

采购前常问

可以按指定幅宽分切吗?

可以。请提供目标幅宽、公差、最大卷径与卷芯内径,我们确认分切条件后报价。

全息图案可以定制吗?

批量订单可定制图案,通常涉及制版费用。请提供图案意向与年用量,以便确认可行性与开版要求。

该选预涂膜还是即涂膜?

预涂(热)膜更洁净、无需烘干,适合多数现代覆膜机;即涂湿法在超长版活上更经济,粘合特性不同。最终由设备条件决定。

为什么金属墨部位会起膜?

金属墨与厚上光层会降低胶层润湿。通常建议提高涂布量、降低机速或加底涂,并先用实际印张试覆。

获取报价

索取「BOPP触感膜 预涂膜」的报价与样品

附上厚度、幅宽、用途与月用量,工程师 24 小时内回复等级建议、数据表与确定报价。

24 小时内报价 · 免费咨询 · 可寄样 · 提供技术数据表