消光/亚光 BOPP预涂膜 — 涂布膜与预涂膜
涂布膜与预涂膜

消光/亚光 BOPP预涂膜

3919109900

按产线条件确认规格后供货:厚度、幅宽、卷长、卷芯与表面处理均可指定。

可提供 TDS / COA / MSDS 支持寄样试机

24 小时内报价 · 免费咨询 · 可寄样 · 提供技术数据表

选型要点

关键特性

01

覆膜温度窗口

每个等级有明确的压合温度与压力范围,按您的设备确认。

02

一个工程师跟到底

由同一名技术联系人确认结构、跟进试机并负责订单,不在销售与工厂之间反复转手。

03

油墨适配

重点核对金属墨、上光油与大墨量,这些是复合牢度失效的常见原因。

04

低光泽质感

哑面降低反光、提升可读性,并带来高级触感。

05

防伪与品牌

全息与镭射图案可定制,并可配合拆封拉线实现防拆封。

技术参数

技术规格

标注「源站」的数值来自原产品目录,其余为订货时可确定的项目;最终以随报价提供的数据表为准。

技术规格 — 消光/亚光 BOPP预涂膜
源站型号3919109900
所属事业部涂布膜与预涂膜
基膜BOPP、BOPET 或纸张,按等级确认
涂层EVA / PVDC / 丙烯酸 / 全息,按等级确认
复合方式预涂热复合或即涂湿复合;压合温度待确认
涂布面单面涂布,处理值按订单确认
卷芯内径3"(76 mm)或 6"(152 mm),下单时确认
卷径与卷长按放卷张力与运输限制确定
包装方式单卷包装、出口纸箱、托盘加固
随货文件TDS · 批次 COA · MSDS · 装箱单 · 出口单证
起订量与交期报价时确认,取决于等级与幅宽

页面参数为源站目录中的参考值。最终厚度、表面处理、卷装参数与公差,以报价时提供的技术数据表为准。

产品说明

关于这个等级

涂布与预涂膜是在基膜上增加功能层:EVA 胶层用于热覆膜、PVDC 提供阻隔、丙烯酸层保护印刷并提升光泽,全息或特种涂层用于品牌防伪。消光/亚光 BOPP预涂膜 属于涂布膜与预涂膜事业部。

选型取决于被复合的基材与覆膜机可稳定保持的温度。确定涂布量与胶种之前,我们会询问纸张或薄膜等级、机速、压合温度,以及是单张还是卷材走料。

涂布膜与预涂膜事业部下共 45 个条目,本页为其中之一。可核对的源站信息:源站型号:3919109900。页面参数为源站目录中的参考值。最终厚度、表面处理、卷装参数与公差,以报价时提供的技术数据表为准。

所有产品均可提供技术数据表(TDS)、批次检测报告 / COA、MSDS 与出口单证;常规等级支持寄样。价格按规格、数量与交期核算,请通过上方按钮询价。

查看源站原始技术说明(中文原文)
BOPP Thermal Lamination Film (glossy and matte lamination) Temperature: It is the first key film, laminating film with hot melt adhesive is the temperature determines the molten hot melt adhesive, leveling determine performance hot melt adhesive, hot melt adhesive molecules to determine diffusion capacity three substances intermolecular BOPP film, printing ink, paper and other substrates, but also determines the degree of crystallinity of hot melt adhesive, only the right to control the temperature of the work area, can the laminating solid heat on the film melting layer completely melted become viscous flow state, with appropriate liquidity to achieve wet adhesion of the printed surface, while ensuring complex immediately after curing. Fumo products to make the appearance of smooth, bright enough, good layer melting degree, no creases. Ink and can peel. Temperature control coating process also affects the changes and decisions to resolve when heated with hot melt adhesive film, as well as new efforts to counter the heat. Therefore, strict control of temperature is the primary key of thermal lamination. According to our practice. Temperature control in about 80 ~ 100C range is more appropriate. Pressure: the right to control the temperature of laminating while also using the appropriate pressure, because the paper itself is not very smooth surface, and only under pressure, hot melt adhesive viscous flow state will be in the air off the surface of the print process fully wet paper printed surface. Colloidal molecules to produce paper print ink, paper intermolecular diffusion, dislocation, to achieve a good bond, a complete coverage of the entire surface of the print to print to bright, no mist, leveling layer, no creases adhesive works well, without wrinkles, due to
应用场景

典型应用

以下为该类材料的常见用途;具体结构请结合您的灌装、印刷与复合条件确认。

01

书刊封面

封面、护封与精装宣传册的热覆膜。

02

纸张复合

海报、菜单、地图与文件的耐水耐撕覆膜。

03

软包装复合

涂布膜作为多层袋结构中的阻隔层或印刷层。

04

高阻隔食品包装

PVDC 涂布膜用于肉制品、奶酪、零食与干制食品。

05

印后加工

预涂膜作覆膜后烫金、压纹与局部效果的基材。

询价准备

提供这些,报价一次到位

  • 目标厚度与公差
  • 分切幅宽与卷长
  • 卷芯内径与最大卷径
  • 印刷、复合或热封工艺
  • 最终用途及是否有食品接触要求
  • 月用量或单次订量
  • 目的港与要求交期
咨询该产品
FAQ

采购前常问

为什么金属墨部位会起膜?

金属墨与厚上光层会降低胶层润湿。通常建议提高涂布量、降低机速或加底涂,并先用实际印张试覆。

可以提供样品吗?

常规等级可提供样片或试样卷。请说明用途与机台,以便寄送有代表性的样品。

全息图案可以定制吗?

批量订单可定制图案,通常涉及制版费用。请提供图案意向与年用量,以便确认可行性与开版要求。

该选预涂膜还是即涂膜?

预涂(热)膜更洁净、无需烘干,适合多数现代覆膜机;即涂湿法在超长版活上更经济,粘合特性不同。最终由设备条件决定。

获取报价

索取「消光/亚光 BOPP预涂膜」的报价与样品

附上厚度、幅宽、用途与月用量,工程师 24 小时内回复等级建议、数据表与确定报价。

24 小时内报价 · 免费咨询 · 可寄样 · 提供技术数据表