Zaec 49u 0002 — Packaging Machinery
Packaging Machinery

Zaec 49u 0002

ZAEC_49U--0002

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Documents that clear customs

TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.

02

Web guiding

Edge or line guiding keeps registration and slitting accuracy at production speed.

03

Documentation

Manuals, electrical drawings and CE / compliance documents as required.

04

Configuration to spec

Machine width, speed and tension control are built to your material and output, not a fixed catalog model.

05

Spare parts

Wear-part list supplied with the machine and stocked for the model's service life.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Zaec 49u 0002
Source referenceZAEC_49U--0002
DivisionPackaging Machinery
ScopeMachine, tooling, installation supervision and training — itemised in the quotation
UtilitiesPower supply, compressed air and space requirements to confirm
AcceptanceTrial run with your material before shipment or at site
Warranty & serviceTerms, spare-parts plan and remote support defined per project
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Packaging Machinery division supplies converting and end-of-line equipment: slitting and rewinding machines, coating lines, printing presses, packaging machines and shrink equipment. Zaec 49u 0002 is quoted as a machine configuration rather than a commodity item.

A machine quotation starts with the web you run and the output you need. We ask for substrate, width range, gauge range, line speed, unwind / rewind diameter, power supply, factory layout and operator count before fixing a specification.

This page is one of 17 entries in the Packaging Machinery division. Source facts available for cross-checking: Source model reference: ZAEC_49U--0002. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
晶体振荡器谐振器 石英晶体振荡器是一种高精度和高稳定度的振荡器,被广泛应用于彩电、计算机、遥控器等各类振荡电路中,以及通信系统中用于频率发生器、为数据处理设备产生时钟信号和为特定系统提供基准信号。 国际电工委员会(IEC)将石英晶体振荡器分为4类:普通晶体振荡(SPXO),电压控制式晶体振荡器(VCXO),温度补偿式晶体振荡(TCXO),恒温控制式晶体振荡(OCXO)。目前发展中的还有数字补偿式晶体损振荡(DCXO)微机补偿晶体振荡器(MCXO)等等。 石英晶体振荡器是利用石英晶体(二氧化硅的结晶体)的压电效应制成的一种谐振器件,它的基本构成大致是:从一块石英晶体上按一定方位角切下薄片(简称为晶片,它可以是正方形、矩形或圆形等),在它的两个对应面上涂敷银层作为电极,在每个电极上各焊一根引线接到管脚 上,再加上封装外壳就构成了石英晶体谐振器,简称为石英晶体或晶体、晶振[1];而在封装内部添加IC组成振荡电路的晶体元件称为晶体振荡器。其产品一般用金属外壳封装,也有用玻璃壳、陶瓷或塑料封装的 1.通用晶体振荡器,用于各种电路中,产生振荡频率。 2.时钟脉冲用石英晶体谐振器,与其它元件配合产生标准脉冲信号,广泛用于数字电路中。 3.微处理器用石英晶体谐振器。 4.CTVVTR用石英晶体谐振器。 5.钟表用石英晶体振荡器。 主要参数 参数 基本描述 准确度频率 在标称电源电压、标称负载阻抗、基准温度(25℃)以及其他条件保持不变,晶体振荡器的频率相对与其规定标称值的最大允许偏差,即(fmax-fmin)/f0; 温度稳定度 其他条件保持不变,在规定温度范围内晶体振荡器输出频率的最大变化量相对于温度范围内输出频率极值之和的允许频偏值,即(fmax-fmin)/(fmax+fmin); 频率调节范围 通过调节晶振的某可变元件改变输出频率的范围。 调频(压控)特性 包括调频频偏、调频灵敏度、调频线性度。 ①调频频偏:压控晶体振荡器控制电压由标称的最大值变化到最小值时输出频率差。 ②调频灵敏度:压控晶体振荡器变化单位外加控制电压所引起的输出频率的变化量。 ③调频线性度:是一种与理想直线(最小二乘法)相比较的调制系统传输特性的量度。 负载特性 其他条件保持不变,负载在规定变化范围内晶体振荡器输出频率相对于标称负载下的输出频率的最大允许频偏。 电压特性 其他条件保持不变,电源电压在规定变化范围内晶体振荡器输出频率相对于标称电源电压下的输出频率的最大允许频偏。 杂波 输出信号中与主频无谐波(副谐波除外)关系的离散频谱分量与主频的功率比,用dBc表示。 谐波 谐波分量功率Pi与载波功率P0之比,用dBc表示。 频率老化 在规定的环境条件下,由于元件(主要是石英谐振器)老化而引起的输出频率随时间的系统漂移过程。通常用某一时间间隔内的频差来量度。对于高稳定晶振,由于输出频率在较长的工作时间内呈近似线性的单方向漂移,往往用老化率(单位时间内的相对频率变化)来量度。 日波动 指振荡器经过规定的预热时间后,每隔一小时测量一次,连续测量24小时,将测试数据按S=(fmax-fmin)/f0式计算,得到日波动。 开机特性 在规定的预热时间内,振荡器频率值的最大变化,用V=(fmax-fmin)/f0表示。 相位噪声 短期稳定度的频域量度。用单边带噪声与载波噪声之比 (f)表示,£(f)与噪声起伏的频谱密度S (f)和频率起伏的频谱密度Sy(f)直接相关,由下式表示: f2S(f)=f02Sy(f)=2f2£(f) f 傅立叶频率或偏离载波频率;f0 载波频率。
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Printing

Gravure and flexo presses for flexible packaging webs.

02

End-of-line packing

Cartoning, wrapping and shrink equipment for dispatch.

03

Film slitting

Slitting and rewinding master rolls into customer widths.

04

Bag making

Converting laminated webs into finished pouches and bags.

05

Tape production

Coating and slitting lines for adhesive tape manufacture.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Can you run our material during acceptance?

Yes, and we recommend it. Send representative reels in advance so the trial reflects your actual gauge, treatment and roll geometry.

Do you handle installation overseas?

Installation supervision and operator training can be included. Scope, travel and any local certification requirements are itemised in the quotation.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Get a Quote

Request a quotation and sample for Zaec 49u 0002

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request