Shrink Wrapping Equipment — Packaging Machinery
Packaging Machinery

Shrink Wrapping Equipment

AEC_ Shrinkage machines

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Commissioning

Installation supervision, operator training and trial-run acceptance are part of the scope.

02

Configuration to spec

Machine width, speed and tension control are built to your material and output, not a fixed catalog model.

03

Documentation

Manuals, electrical drawings and CE / compliance documents as required.

04

Tension control

Closed-loop tension control protects thin webs and keeps roll geometry consistent.

05

Samples before commitment

Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Shrink Wrapping Equipment
Source referenceAEC_ Shrinkage machines
DivisionPackaging Machinery
ScopeMachine, tooling, installation supervision and training — itemised in the quotation
UtilitiesPower supply, compressed air and space requirements to confirm
AcceptanceTrial run with your material before shipment or at site
Warranty & serviceTerms, spare-parts plan and remote support defined per project
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Packaging Machinery division supplies converting and end-of-line equipment: slitting and rewinding machines, coating lines, printing presses, packaging machines and shrink equipment. Shrink Wrapping Equipment is quoted as a machine configuration rather than a commodity item.

A machine quotation starts with the web you run and the output you need. We ask for substrate, width range, gauge range, line speed, unwind / rewind diameter, power supply, factory layout and operator count before fixing a specification.

This page is one of 17 entries in the Packaging Machinery division. Source facts available for cross-checking: Source model reference: AEC_ Shrinkage machines. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
收缩机 采用收缩薄膜包裹在产品或包装件外面,经过加热,使收缩薄膜收缩裹紧产品或包装件,充分显示物品的外观,提高产品的展销性,增加美观及价值感。经过热收缩机包装后的物品能密封、防潮、防污染,并保护商品免受来自外部的冲击,具有一定的缓冲性,尤其是当包装易碎品时,能防止器皿破碎时飞散。 热收缩膜包装机,热收缩膜机,收缩膜包装机,收缩裹包设备,收缩包装机,收缩膜机,热收缩机,热收缩包装机等等。收缩机是一种高度自动化的设备,该产品广泛应用在药品、食品饮料和家化等行业,应用收缩膜包装机可大大减少采用中盒包装的材料和人工成本,具有重要的经济意义。 全自动收缩包装机是一种气动元件和机械装置相结合的,由PLC和其它外围线路控制的自动包装设备。该设备的执行元件是气缸。由二位五通电磁阀控制其前进和后退。气缸的工作位置由磁性开关和接近开关检测并反馈给PLC,由PLC通过程序发出控制命令给相应气缸的电磁阀,从而控制气缸的动作。 收缩机系列 按膜不同分:PE膜收缩机,POF膜收缩机: 按加热方式分:石英管加热,不锈钢加热 按调速分:电子调速,变频调速 适用对象 胶带包装,玻璃瓶、发泡胶、纸盒、玩具、电子、电器、文具、图书、唱片、五金工具、日用品、药品、化妆品、饮料、水果、纪念标签等物品包装。 收缩机还有其它的用途,例如,瓶口胶帽收缩机主要用于食品类的葡萄酒、玻璃瓶等,医药类的针剂药瓶收缩,能有效的将瓶口密封,确保产品卫生。 汽车用品收缩机还适用于酒店行业、食品行业、医药行业等。 结构及配置 ① 采用远红外线直接加热; ② 设备体型小巧,预热时间短、省电; ③ 电子无级变速调温; ④ 收缩不影响包装物品的品质而能收缩包装完美; ⑤ 适用于规则或不规则物品的包装,结构简单易操作,清洗方便。 根据不同的包装方式,收缩机大致分为以下三种包装形式: 两端开放式 它是用筒状膜或平膜先将被包装物裹在一个套筒里然后再进行热收缩作业,包装完成后在包装物两端均有一个收缩口。 (1)当采用筒状膜时,先将筒膜开口撑开,再借助滑槽将产品推入筒膜中,然后切断薄膜。如图1 所示。这种方式比较适合于对圆柱体形物品裹包,如电池、纸卷、瓶罐的包装等。用筒状膜包装的优点是减少了1 ~ 2 道封缝工序,外形美观,缺点是不能适应产品多样化要求,只适用于单一产品的大批量生产。 (2)用平膜裹包物品,有用单张平膜和双张平膜裹包两种方式。薄膜要宽于物品,用双张平膜,即用上、下两张薄膜裹包,在前一个包装件完成封口剪断的同时,两片膜就被封接起来,然后将产品用机器或手工推向直立的薄膜,到位后封剪机构下落,将产品的另一个侧边封接并剪断,薄膜裹包的产品经热收缩后,包装件两端收缩形成椭圆形开口,用单张平膜时,先将平膜展开,将被裹包产品对着平膜中部送进,形成马蹄形裹包,再热封搭接封口。 四面密封式 将产品四周用平膜或筒状膜包裹起来,接缝采用搭接式密封。用于要求密封的产品包装。 (1)用对折膜可采用L 型封口方式,采用卷筒对折膜,将膜拉出一定长度置于水平位置,用机械或手工将开口端撑开,把产品推到折缝处。 (2)用单张平膜可采用枕形袋式包装。这种方法是用单张平膜,先封纵缝成筒状,将产品推入其中,然后封横缝切断制成枕型包装或者将两端打卡结扎成筒式包装。 (3)用双张平膜四面密封式包装与两端开放式类似,只需在机器上配备两边封口装置即可完成。 (4)用筒状膜裹包,则只需在筒状膜切断的同时进行封口、刺孔,然后进行热收缩。在封口器旁常有刺针,热封时刺针在薄膜上刺出放气孔,在热收缩后小孔常自行封闭。 一端开放式 托盘收缩包装是一典型实例,先将薄膜制成方底大袋,再将大袋自上而下套在堆叠商品托盘上,然后进行热收缩。将装好产品的托盘放在输送带上,套上收缩薄膜袋;由输送带送入热收缩通道,通过热收缩通道后即完成收缩包装。其主要特点是产品可以以一定数量为单位牢固地捆包起来,在运输过程中不会松散,并能在露天堆放。 发热管石英管 石英管是采用远红外线辐射直接加热,电子无级变速,固态调压器控温,稳定可靠; 不锈钢发热管 优质不锈钢发热管,内部双向热循环风,热量均匀、恒定。采用电子调速器调速,可以任意调整输送速度,以确保输送的平稳性及良好的收缩效果; 包装之后的产品能密封、防潮、防撞击,适用于多件物品裹紧包装和托盘包装;数显电脑自能控温,温差小;稳定可靠
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Tape production

Coating and slitting lines for adhesive tape manufacture.

02

End-of-line packing

Cartoning, wrapping and shrink equipment for dispatch.

03

Bag making

Converting laminated webs into finished pouches and bags.

04

Printing

Gravure and flexo presses for flexible packaging webs.

05

Coating and laminating

Applying adhesives, primers or functional coatings to film and paper.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Do you handle installation overseas?

Installation supervision and operator training can be included. Scope, travel and any local certification requirements are itemised in the quotation.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Can you run our material during acceptance?

Yes, and we recommend it. Send representative reels in advance so the trial reflects your actual gauge, treatment and roll geometry.

Get a Quote

Request a quotation and sample for Shrink Wrapping Equipment

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request