Model Of Sdf F 1300 Plastic Extrusion Compound Uni — Packaging Machinery
Packaging Machinery

Model Of Sdf F 1300 Plastic Extrusion Compound Uni

Model of SDF-F 1300 Plastic Extrusion Compound Uni

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Web guiding

Edge or line guiding keeps registration and slitting accuracy at production speed.

02

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

03

Samples before commitment

Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.

04

Spare parts

Wear-part list supplied with the machine and stocked for the model's service life.

05

Changeover time

Quick-change shafts and recipe storage shorten changeover between jobs.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Model Of Sdf F 1300 Plastic Extrusion Compound Uni
Source referenceModel of SDF-F 1300 Plastic Extrusion Compound Uni
DivisionPackaging Machinery
ScopeMachine, tooling, installation supervision and training — itemised in the quotation
UtilitiesPower supply, compressed air and space requirements to confirm
AcceptanceTrial run with your material before shipment or at site
Warranty & serviceTerms, spare-parts plan and remote support defined per project
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Packaging Machinery division supplies converting and end-of-line equipment: slitting and rewinding machines, coating lines, printing presses, packaging machines and shrink equipment. Model Of Sdf F 1300 Plastic Extrusion Compound Uni is quoted as a machine configuration rather than a commodity item.

A machine quotation starts with the web you run and the output you need. We ask for substrate, width range, gauge range, line speed, unwind / rewind diameter, power supply, factory layout and operator count before fixing a specification.

This page is one of 17 entries in the Packaging Machinery division. Source facts available for cross-checking: Source model reference: Model of SDF-F 1300 Plastic Extrusion Compound Uni. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
主要技术参数Main feature 适用涂膜树脂 EVA等涂复级 Using colophony EVA coating colophony etc 基材 BOPP Base material BOPP 最高工作速度 150m/min (速度由使用材料、工艺条件决定) Max working speed 150m/min (speed by technics , materials) 涂膜宽度 1200mm Coating width 1200mm 涂膜厚度 0.010-0.05mm ( 10-50 m ) Coating thickness 0.010-0.05mm ( 10-50 m ) 涂膜厚度误差 <= 5% Uniformity of thickness <= 5% 张力设定范围 10-150kg/全幅宽,恒张力 Tension scope 10-150kg/whole breadth, permanent tension 最大挤出量 最大200kg/小时 Max extruder qty Max 200kg/h 收、放卷形式: 3 气胀轴式中心收卷 Unwinding Reeling 3 gas swell central reeling 基材卷芯内径 76mm I.D of the base material 76mm 整机电气控制方式: PLC可编程控制器,6 人机界面操作 Strain control: PLC program controller ,6 man interface operation 驱动电机: 交流变频电机、异步电动机和齿轮电机 Motor: AC Motor, asynchronous motor and Geared Motor 变频器: 交流数字式矢量控制变频器; Transducer: AC digital vector control 电 源: 主电源 三相380V,单相220V、50HZ Power : 380V, single-phase220V、50HZ 冷 却 水: 温度20-25 c流量30m&sup /h,水压 2kg /cm&sup 以上 Cooling water: 20-25 C Flow30m&sup /h,hydraulic pressure above 2kg /cm&sup 挤出机加热方式: 电 Extruder heating : electric 机器重量 约32000kg Weight About 32000kg 外观尺寸 14000mm 8800mm 2850mm(长 宽 高) Size 14000mm 8800mm 2850mm 机身颜色 多种颜色(用户可选择) Color can be choosed by buyer 机组配置Machine Configuration A、放卷装置 unwinding device: 1套/set (1) 独立塔式电动翻转式双工位 Independence Tower Type electric roll-over double position (2) 放卷最大直径: 800mm Unwinding max diameter: 800mm (3) 翻转架转速: 1r/min roll-over stand rev: 1r/min (4) 张力范围: 3-30kg tension scope: 3-30kg (5) 张力精度: +0.2kg tension precision: +0.2kg (6) 张力控制系统:气缸缓冲浮动摆辊式结构,由精密电位器检测张力,可编程控制器PLC集中控制张力 (Japan Fujikura日本腾仓 ) tension control system:cylinder amortize float roller ,tension testing by the precision potentiometer,Program controller, PLC centralize control the tension (7) 驱动控制系统:5.5KW矢量变频电机驱动,旋转编码器速度反馈, Drive control system:5.5KW vector frequency conver
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Bag making

Converting laminated webs into finished pouches and bags.

02

Film slitting

Slitting and rewinding master rolls into customer widths.

03

End-of-line packing

Cartoning, wrapping and shrink equipment for dispatch.

04

Coating and laminating

Applying adhesives, primers or functional coatings to film and paper.

05

Tape production

Coating and slitting lines for adhesive tape manufacture.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Do you handle installation overseas?

Installation supervision and operator training can be included. Scope, travel and any local certification requirements are itemised in the quotation.

Can you run our material during acceptance?

Yes, and we recommend it. Send representative reels in advance so the trial reflects your actual gauge, treatment and roll geometry.

Get a Quote

Request a quotation and sample for Model Of Sdf F 1300 Plastic Extrusion Compound Uni

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request