Flanges — Packaging Machinery
Packaging Machinery

Flanges

Flanges

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Documents that clear customs

TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.

02

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

03

Tension control

Closed-loop tension control protects thin webs and keeps roll geometry consistent.

04

Changeover time

Quick-change shafts and recipe storage shorten changeover between jobs.

05

Spare parts

Wear-part list supplied with the machine and stocked for the model's service life.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Flanges
Source referenceFlanges
DivisionPackaging Machinery
ScopeMachine, tooling, installation supervision and training — itemised in the quotation
UtilitiesPower supply, compressed air and space requirements to confirm
AcceptanceTrial run with your material before shipment or at site
Warranty & serviceTerms, spare-parts plan and remote support defined per project
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Packaging Machinery division supplies converting and end-of-line equipment: slitting and rewinding machines, coating lines, printing presses, packaging machines and shrink equipment. Flanges is quoted as a machine configuration rather than a commodity item.

A machine quotation starts with the web you run and the output you need. We ask for substrate, width range, gauge range, line speed, unwind / rewind diameter, power supply, factory layout and operator count before fixing a specification.

This page is one of 17 entries in the Packaging Machinery division. Source facts available for cross-checking: Source model reference: Flanges. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
法兰盘产品分类 平焊法兰 对焊法兰 松套法兰 不锈钢法兰 碳钢法兰 实景拍摄法兰 对焊弯头 其他 突面(RF) 生产材料 碳钢(Carbon Steel):ASTM A105,20#、Q235、16Mn、 ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2、ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70; 不锈钢(Stainess Steel): ASTM A182 F304、304L、 F316、316L、1Cr18Ni9Ti、0Cr18Ni9Ti、321、18-8; 合金钢(Alloy Steel): ASTM A182 F1、 F5a、 F9、 F11、 F12、 F22、F91、A182F12、A182F11、16MnR、Cr5Mo、12Cr1MoV、15CrMo、12Cr2Mo1、A335P22、 St45.8/Ⅲ; 法兰适用标准 化工部HG20593-1997、国标GB/T9119-2000 2Cr1MoV、15CrMo、12Cr2Mo1、A335P22、St45.8/Ⅲ; 法兰制造标准 PN(MPa) 公称通径DN 尺寸(mm) D D1 Z-M D2 f b 0.6 10 75 50 4-M10 33 2 12 15 80 55 4-M10 38 2 12 20 90 65 4-M10 48 2 14 25 100 75 4-M10 58 2 14 32 120 90 4-M12 69 2 16 40 130 100 4-M12 78 3 16 50 140 110 4-M12 88 3 16 65 160 130 4-M12 108 3 16 80 190 150 4-M16 124 3 18 100 210 170 4-M16 144 3 18 125 240 200 8-M16 174 3 20 150 265 225 8-M16 199 3 20 200 320 280 8-M16 254 3 22 250 375 335 12-M16 309 3 24 300 440 395 12-M20 363 3 24 350 490 445 12-M20 413 4 26 400 540 495 16-M20 463 4 28 450 595 550 16-M20 518 4 28 500 645 600 20-M20 568 4 30 600 755 705 20-M24 667 4 30 700 860 810 24-M24 772 5 32 800 975 920 24-M27 878 5 34 900 1075 1020 24-M27 978 5 36 1000 1175 1120 28-M27 1078 5 36 1200 1405 1340 32-M30 1295 5 40 1400 1630 1560 36-M33 1510 5 44 1600 1830 1760 40-M33 1710 5 48 1800 2045 1970 44-M36 1918 5 50 2000 2265 2180 18-M39 2125 5 54 2200 2475 2390 52-M339 2335 5 60 2400 2685 2600 56-M39 2545 5 62 2600 2905 2810 60-M45 2750 6 64 2800 3115 3020 64-M45 2960 6 68 3000 3315 3220 68-M45 3160 6 70 3200 3525 3430 72-M45 3370 6 76 3400 3735 3640 76-M45 3580 6 80 3600 3970 3860 80-M52 3790 6 84 [下一个产品:slitting knife]→
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Printing

Gravure and flexo presses for flexible packaging webs.

02

Coating and laminating

Applying adhesives, primers or functional coatings to film and paper.

03

Film slitting

Slitting and rewinding master rolls into customer widths.

04

Tape production

Coating and slitting lines for adhesive tape manufacture.

05

End-of-line packing

Cartoning, wrapping and shrink equipment for dispatch.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Can you run our material during acceptance?

Yes, and we recommend it. Send representative reels in advance so the trial reflects your actual gauge, treatment and roll geometry.

Get a Quote

Request a quotation and sample for Flanges

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request