Electrical Relays — Packaging Machinery
Packaging Machinery

Electrical Relays

AEC_ Electrical relays

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Spare parts

Wear-part list supplied with the machine and stocked for the model's service life.

02

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

03

Commissioning

Installation supervision, operator training and trial-run acceptance are part of the scope.

04

Configuration to spec

Machine width, speed and tension control are built to your material and output, not a fixed catalog model.

05

Documentation

Manuals, electrical drawings and CE / compliance documents as required.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Electrical Relays
Source referenceAEC_ Electrical relays
DivisionPackaging Machinery
ScopeMachine, tooling, installation supervision and training — itemised in the quotation
UtilitiesPower supply, compressed air and space requirements to confirm
AcceptanceTrial run with your material before shipment or at site
Warranty & serviceTerms, spare-parts plan and remote support defined per project
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Packaging Machinery division supplies converting and end-of-line equipment: slitting and rewinding machines, coating lines, printing presses, packaging machines and shrink equipment. Electrical Relays is quoted as a machine configuration rather than a commodity item.

A machine quotation starts with the web you run and the output you need. We ask for substrate, width range, gauge range, line speed, unwind / rewind diameter, power supply, factory layout and operator count before fixing a specification.

This page is one of 17 entries in the Packaging Machinery division. Source facts available for cross-checking: Source model reference: AEC_ Electrical relays. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
继电器(英文名称:relay)是一种电控制器件,是当输入量(激励量)的变化达到规定要求时,在电气输出电路中使被控量发生预定的阶跃变化的一种电器。它具有控制系统(又称输入回路)和被控制系统(又称输出回路)之间的互动关系。通常应用于自动化的控制电路中,它实际上是用小电流去控制大电流运作的一种 自动开关 。故在电路中起着自动调节、安全保护、转换电路等作用。 主要分类 1.按继电器的工作原理或结构特征分类 1)电磁继电器:利用输入电路内电路在电磁铁铁芯 继电器(图4) 与衔铁间产生的吸力作用而工作的一种电气继电器。 2)固体继电器:指电子元件履行其功能而无机械运动构件的,输入和输出隔离的一种继电器。 3)温度继电器:当外界温度达到给定值时而动作的继电器。 4)舌簧继电器:利用密封在管内,具有触电簧片和衔铁磁路双重作用的舌簧动作来开,闭或转换线路的继电器 5)时间继电器:当加上或除去输入信号时,输出部分需延时或限时到规定时间才闭合或断开其被控线路继电器。 6)高频继电器:用于切换高频,射频线路而具有最小损耗的继电器。 7)极化继电器:有极化磁场与控制电流通过控制线圈所产生的磁场综合作用而动作的继电器。继电器的动作方向取决于控制线圈中流过的的电流方向。 8)其他类型的继电器:如光继电器,声继电器,热继电器,仪表式继电器,霍尔效应继电器,差动继电器等。 2、按继电器的外形尺寸分类 1)微型继电器 2)超小型微型继电器 3)小型微型继电器 注:对于密封或封闭式继电器,外形尺寸为继电器本体三个相互垂直方向的最大尺寸,不包括安装件,引出端,压筋,压边,翻边和密封焊点的尺寸。 3、按继电器的负载分类 1)微功率继电器 2)弱功率继电器 3)中功率继电器 4)大功率继电器 4、按继电器的防护特征分类 1)密封继电器 2)封闭式继电器 3)敞开式继电器 5、按继电器按照动作原理可分类 1)电磁型 2)感应型 3)整流型 4)电子型 5)数字型等 6、按照反应的物理量可分类 1)电流继电器 2)电压继电器 3)功率方向继电器 4)阻抗继电器 5)频率继电器 6)气体(瓦斯)继电器 7、按照继电器在保护回路中所起的作用可分类 1)启动继电器 2)量度继电器 3)时间继电器 4)中间继电器 5)信号继电器 6)出口继电器 主要作用 继电器是具有隔离功能的自动开关元件,广泛应用于遥控、遥测、 继电器(图3) 通讯、自动控制、机电一体化及电力电子设备中,是最重要的控制元件之一。 继电器一般都有能反映一定输入变量(如电流、电压、功率、阻抗、频率、温度、压力、速度、光等)的感应机构(输入部分);有能对被控电路实现 通 、 断 控制的执行机构(输出部分);在继电器的输入部分和输出部分之间,还有对输入量进行耦合隔离,功能处理和对输出部分进行驱动的中间机构(驱动部分)。 作为控制元件,概括起来,继电器有如下几种作用: 1) 扩大控制范围:例如,多触点继电器控制信号达到某一定值时,可以按触点组的不同形式,同时换接、开断、接通多路电路。 2) 放大:例如,灵敏型继电器、中间继电器等,用一个很微小的控制量,可以控制很大功率的电路。 3)综合信号:例如,当多个控制信号按规定的形式输入多绕组继电器时,经过比较综合,达到预定的控制效果。 4) 自动、遥控、监测:例如,自动装置上的继电器与其他电器一起,可以组成程序控制线路,从而实现自动化运行。 继电器的触点有三种基本形式: 1、动合型(常开)(H型)线圈不通电时两触点是断开的,通电后,两个触点就闭合。以合字的拼音字头 H 表示。 2、动断型(常闭)(D型)线圈不通电时两触点是闭合的,通电后两个触点就断开。用断字的拼音字头 D 表示。 3、转换型(Z型)这是触点组型。这种触点组共有三个触点,即中间是动触点,上下各一个静触点。线圈不通电时,动触点和其中一个静触点断开和另一个闭合,线圈通电后,动触点就移动,使原来断开的成闭合,原来闭合的成断开状态,达到转换的目的。这样的触点组称为转换触点。用 转 字的拼音字头 z 表示。 常见类型 1、过电流继电器 过电流继电器,简称CO,是从电流超过其设定值而动作的继电器,可做系统线路及过载的保护用,最常用的是感应型过电流继电器,是利用电磁铁与铝或铜制的旋转盘相对,依靠电磁感应原理使旋转圆盘转动,以
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Bag making

Converting laminated webs into finished pouches and bags.

02

Printing

Gravure and flexo presses for flexible packaging webs.

03

Coating and laminating

Applying adhesives, primers or functional coatings to film and paper.

04

Film slitting

Slitting and rewinding master rolls into customer widths.

05

Tape production

Coating and slitting lines for adhesive tape manufacture.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Do you handle installation overseas?

Installation supervision and operator training can be included. Scope, travel and any local certification requirements are itemised in the quotation.

Can you run our material during acceptance?

Yes, and we recommend it. Send representative reels in advance so the trial reflects your actual gauge, treatment and roll geometry.

Get a Quote

Request a quotation and sample for Electrical Relays

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request