Cbb — Packaging Machinery
Packaging Machinery

Cbb

AEC_CBB

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Web guiding

Edge or line guiding keeps registration and slitting accuracy at production speed.

02

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

03

Documentation

Manuals, electrical drawings and CE / compliance documents as required.

04

Changeover time

Quick-change shafts and recipe storage shorten changeover between jobs.

05

Tight gauge tolerance

Capacitor grades require exceptionally uniform gauge and clean surfaces for reliable winding and breakdown strength.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Cbb
Source referenceAEC_CBB
DivisionPackaging Machinery
ScopeMachine, tooling, installation supervision and training — itemised in the quotation
UtilitiesPower supply, compressed air and space requirements to confirm
AcceptanceTrial run with your material before shipment or at site
Warranty & serviceTerms, spare-parts plan and remote support defined per project
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Packaging Machinery division supplies converting and end-of-line equipment: slitting and rewinding machines, coating lines, printing presses, packaging machines and shrink equipment. Cbb is quoted as a machine configuration rather than a commodity item.

A machine quotation starts with the web you run and the output you need. We ask for substrate, width range, gauge range, line speed, unwind / rewind diameter, power supply, factory layout and operator count before fixing a specification.

This page is one of 17 entries in the Packaging Machinery division. Source facts available for cross-checking: Source model reference: AEC_CBB. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
薄膜电容器(交流马达) 薄膜电容(Film Capacitor)器又称塑料薄膜电容(Plastic Film Capacitor)。其以塑料薄膜为电介质。 电容器依着介质的不同,它的种类很多,例如:电解质电容、纸质电容、薄膜电容、陶瓷电容、云母电容、空气电容等。但是在音响器材中使用最频繁的,当属电解电容器和薄膜(Film)电容器。电解电容大多被使用在需要电容量很大的地方,例如主电源部分的滤波电容,除了滤波之外,并兼做储存电能之用。而薄膜电容则广泛被使用在模拟信号的交连,电源噪声的旁路(反交连)等地方。 金属化薄膜电容器通常的薄膜电容器其制法是将铝等金属箔当成电极和塑料薄膜重叠后卷绕在一起制成。但是另外薄膜电容器又有一种制造法,叫做金属化薄膜(Metallized Film),其制法是在塑料薄膜上以真空蒸镀上一层很薄的金属以做为电极。如此可以省去电极箔的厚度,缩小电容器单位容量的体积,所以薄膜电容器较容易做成小型,容量大的电容 器。例如常见的MKP电容,就是金属化聚丙烯膜电容器(Metailized Polypropylene Film Capacitor)的代称,而MKT则是金属化聚乙酯电容(Metailized Polyester)的代称。 金属化薄膜电容器所使用的薄膜有聚乙酯、聚丙烯、聚碳酸酯等,除了卷绕型之外,也有叠层型。金属化薄膜这种型态的电容器具有一种所谓的我我复原作用(Self Healing Action),即假设电极的微小部份因为电界质脆弱而引起短路时,引起短路部份周围的电极金属,会因当时电容器所带的静电能量或短路电流,而引发更大面积的溶 融和蒸发而恢复绝缘,使电容器再度回复电容器的作用。 金属化薄膜电容器的特点: 金属化薄膜电容即是在聚酯薄膜的表面蒸镀一层金属膜代替金属箔做为电极,因为金属化膜层的厚度远小于金属箔的厚度,因此卷绕后体积也比金属箔式电容体积小很多。金属化膜电容的最大优点是 自愈 特性。所谓自愈特性就是假如薄膜介质由于在某点存在缺陷以及在过电压作用下出现击穿短路,而击穿点的金属化层可在电弧作用下瞬间熔化蒸发而形成一个很小的无金属区,使电容的两个极片重新相互绝缘而仍能继续工作,因此极大提高了电容器工作的可靠性。从原理上分析,金属化薄膜电容应不存在短路失效的模式,而金属箔式电容器会出现很多短路失效的现象。金属化薄膜电容器虽有上述巨大的优点,但与金属箔式电容相比,也有如下两项缺点: 一是容量稳定性不如箔式电容器,这是由于金属化电容在长期工作条件易出现容量丢失以及自愈后均可导致容量减小,因此如在对容量稳定度要求很高的振荡电路使用,应选用金属箔式电容更好。 另一主要缺点为耐受大电流能力较差,这是由于金属化膜层比金属箔要薄很多,承载大电流能力较弱。为改善金属化薄膜电容器这一缺点,目前在制造工艺上已有改进的大电流金属化薄膜电容产品,其主要改善途径有1)用双面金属化薄膜做电极;2)增加金属化镀层的厚度;3)端面金属焊接工艺改良,降低接触电阻
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Tape production

Coating and slitting lines for adhesive tape manufacture.

02

Coating and laminating

Applying adhesives, primers or functional coatings to film and paper.

03

Bag making

Converting laminated webs into finished pouches and bags.

04

Film slitting

Slitting and rewinding master rolls into customer widths.

05

Printing

Gravure and flexo presses for flexible packaging webs.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can you run our material during acceptance?

Yes, and we recommend it. Send representative reels in advance so the trial reflects your actual gauge, treatment and roll geometry.

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

Do you handle installation overseas?

Installation supervision and operator training can be included. Scope, travel and any local certification requirements are itemised in the quotation.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Get a Quote

Request a quotation and sample for Cbb

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request