Metallized BOPP Film — Grade 10 — BOPP Film
BOPP Film

Metallized BOPP Film — Grade 10

3919109900

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Slip and anti-block

Coefficient of friction is tuned for vertical form-fill-seal, overwrapping and magazine stacking.

02

Seal window

Heat-sealable grades offer a defined seal initiation temperature and hot-tack range for VFFS lines.

03

Yield per kilogram

Oriented film gives more square metres per kilogram than cast film of the same gauge — a real cost lever.

04

Gauge consistency

Thickness is measured across the web and recorded on the lot COA, which matters for yield and sealing.

05

Moisture barrier

BOPP naturally resists water vapour; metallising or PVDC coating raises the barrier for longer shelf life.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Metallized BOPP Film — Grade 10
Thickness (source)3, 4, 5, 6, 7, 8, 9, 10, 12 µm
Roll width (source)30, 40, 50, 60, 70, 80, 90, 100, 120, 130 mm
Source reference3919109900
DivisionBOPP Film
MaterialBiaxially oriented polypropylene (BOPP)
StructureMono-layer or co-extruded A/B/A — confirm by grade
SurfaceCorona one or both sides; dyne level to order
ThicknessConfirmed against your line; indicative value shown where available
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Biaxially oriented polypropylene is the workhorse substrate of flexible packaging: stiff, clear, printable and economical at line speed. Metallized BOPP Film — Grade 10 is a grade in our BOPP Film division, supplied as roll stock for printing, lamination, overwrapping, bag making or tape coating.

Plain BOPP does not heat-seal on its own. Depending on your line, the construction is a co-extruded sealing layer, a PVDC or acrylic coating, or a laminate with PE / CPP as the sealant web. We confirm that structure, the corona treatment level and the roll geometry with you before issuing a firm quotation.

This page is one of 102 entries in the BOPP Film division. Source facts available for cross-checking: Source catalogue thickness: 3, 4, 5, 6, 7, 8, 9, 10, 12 µm; Source catalogue width: 30, 40, 50, 60, 70, 80, 90, 100, 120, 130 mm; Source model reference: 3919109900. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
Certification: ISO9001, ISO14001, OHSMS18000 Each products have its own special,natural,outstanding soul! One company (anhui eastern communication) offer tear tape products to the world market sufficiently. Great largest market bone great largest enterprises, and great demand of tear tape all over the world pushs our company (anhui eastern communication) grewing largest scales. BOPP Metallized Capacitor Film (silver) Metallized BOPP Capacitor Film (silver film) have two items : 1. Zn/Al Metallized BOPP Capacitor Film (silver film) 2. Al Metallized BOPP Capacitor Film (silver film) Metallized BOPP Capacitor Film were also called silver pp Capacitor film, CBB capacitor metallized film Type:Jumbo rolls and small finished rolls : reinforced edge ( of Alum inum/Zinc film ) are : 1.5,2.0,2.5 MM The standard thickness range including: 3,4,5,6,7,8,9,10,12 microns . The standard tolerance thickness: +/-0.2 Um . The standard width range including: 30,40,50,60,70,80,90,100,120,130 MM The standard tolerance width: +/-5 MM. The inner core : 3" (76MM) The outer core: 150-350 MM . Features: zn/al BOPP capacitor film 1) single side corona treated for the Zn or Zn/Al metallized . Technology data for buyer's reference: Photos of BOPP silver metallized capacitor film Polypropylene metallized Film Zn metallized capacitor bopp film 2. Usage: It was widely used for AC motor capacitors and other electronic parts 3. Featuring : 4. Technology data: TYPICAL VALUES AND PHYSICAL PROPERTIES 5. Packing: carton and pallets ( use cartons and kraft paper and bobble film to packing as inner package, and use pallets and wood board to packing as outer package) OUR SERVICE •Your inquiry related to our product & price will be replied within 24 hour
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Flower and stationery

Flower sleeves, envelope windows and clear stationery packaging.

02

Labels and overwraps

Wrap-around labels, cigarette overwrapping and gift-box films with tear tape.

03

Capacitor dielectric

Ultra-clean metallised grades with tight gauge tolerance for film capacitors.

04

Laminated pouches

BOPP print web laminated to PE or CPP as the sealant layer.

05

Fresh produce

Anti-fog grades for chilled salads, fruit and bakery flow wrap.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Is this grade food-contact compliant?

Documentation is issued per grade and per lot. Tell us the market you ship to (EU, FDA, GB or other) so we supply the correct declaration instead of a generic statement.

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

How should BOPP reels be stored?

Keep reels in their original wrap, away from direct sunlight, heat and humidity, and allow them to acclimatise in the production area before slitting or printing.

Can you match a film we already run?

Send the current datasheet or a retained sample. We compare gauge, treatment, COF, seal window and optical values, then propose the nearest grade and a trial reel.

Get a Quote

Request a quotation and sample for Metallized BOPP Film — Grade 10

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request