Samples before commitment
Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.
Quotation within 24 hours · No obligation · Samples available · Technical data on request
Trial reels or sample sheets can be dispatched for standard grades so you can run a line trial before placing a production order.
A good oxygen and aroma barrier on its own, and an excellent substrate for metallising or PVDC coating.
TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.
Clean, low-gel surface for vacuum metallising, thermal transfer coating and fine-line printing.
Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.
Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.
| Source reference | AEC_PET-TTR |
|---|---|
| Division | BOPET Film |
| Material | Biaxially oriented polyethylene terephthalate (BOPET) |
| Surface | Plain, corona-treated, chemically primed or silicone-coated — to order |
| Thermal | Confirm process temperature and dwell time at enquiry |
| Core ID | 3" (76 mm) or 6" (152 mm), confirmed at order |
| Roll build | Set to your unwind tension and shipping limits |
| Packing | Individual reel wrap, export carton, palletised |
| Documentation | TDS · lot COA · MSDS · packing list · export docs |
| MOQ & lead time | Confirmed in the quotation; depends on grade and width |
Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
Biaxially oriented polyester (BOPET) is chosen when a package or an industrial process needs heat resistance, dimensional stability and mechanical strength that polyolefin films cannot give. BOPET Polyester Film — Grade 28 sits in our BOPET Film division and is supplied as roll stock for converting, metallising, coating or printing.
PET absorbs moisture and is sensitive to web tension at elevated temperature. We therefore confirm the thermal and tension conditions of your process, the surface treatment and the slip level before recommending a grade, rather than quoting from thickness alone.
This page is one of 34 entries in the BOPET Film division. Source facts available for cross-checking: Source model reference: AEC_PET-TTR. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.
Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.
Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.
Ultra-thin PET base film for wax, wax-resin and resin ribbon coating.
Insulating tape, motor slot liners, cable wrapping and flexible circuits.
Heat-resistant lidding for trays and ready-meal containers.
PET outer layer in photovoltaic module backsheet laminates.
Metallised PET for high-barrier snack, coffee and pharmaceutical packs.
Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.
PET picks up moisture. Condensation on a cold reel causes poor ink adhesion and metallising defects, so reels should reach the production-room temperature in their sealed wrap first.
Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.
Thin PET grades are available for thermal transfer and capacitor use. Availability depends on width and quantity, so send both when enquiring.

A good oxygen and aroma barrier on its own, and an excellent substrate for metallising or PVDC coating.

A good oxygen and aroma barrier on its own, and an excellent substrate for metallising or PVDC coating.

TDS, lot COA, MSDS, packing list and export documents are prepared per shipment; food-contact declarations are available where the grade applies.
Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.
Quotation within 24 hours · No obligation · Samples available · Technical data on request