Bitumen — Adhesive Tape & Glue
Adhesive Tape & Glue

Bitumen

Bitumen

Supplied to your line conditions — thickness, width, roll length, core size and surface treatment can all be specified.

TDS / COA / MSDS available Trial reels available

Quotation within 24 hours · No obligation · Samples available · Technical data on request

Why this grade

Key characteristics

01

Slit to your unwind

Roll width, roll length, roll OD and core ID are set against your unwinding and splicing conditions rather than a fixed stock list.

02

One engineer, one specification

A single technical contact confirms the construction, follows the trial and stays on the order — no hand-off between sales and plant.

03

Holding power

Adhesive formulation is matched to carton board and storage temperature to resist edge lifting.

04

Unwind control

Consistent release force keeps automatic case sealers running without web break or noise spikes.

05

Clarity and printability

Crystal-clear backing for retail cartons; printed and branded tape available for volume orders.

Specification

Technical Specifications

Values marked “source” come from the original catalogue; the remaining items are set when the order is specified. The datasheet issued with your quotation governs.

Technical Specifications — Bitumen
Source referenceBitumen
DivisionAdhesive Tape & Glue
BackingBOPP, crepe paper, foam or tissue — confirm by grade
AdhesiveWater-based acrylic / hot melt / solvent — confirm by grade
Total thicknessBacking + coating; confirmed against the datasheet
Roll formatHand roll, machine roll or jumbo roll; splice declaration for converters
Core ID3" (76 mm) or 6" (152 mm), confirmed at order
Roll buildSet to your unwind tension and shipping limits
PackingIndividual reel wrap, export carton, palletised
DocumentationTDS · lot COA · MSDS · packing list · export docs
MOQ & lead timeConfirmed in the quotation; depends on grade and width

Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Product description

About this grade

Our Adhesive Tape & Glue division covers BOPP packing tape, jumbo rolls for converters, masking and double-sided tapes, plus hot-melt and acrylic adhesives. Bitumen is supplied either as a finished tape or as a semi-finished roll, depending on the grade.

Tape performance is a system: backing film, release coating, adhesive chemistry and coating weight all interact. We confirm the carton surface, application temperature, storage conditions and whether the tape is applied by hand or by an automatic case sealer before recommending a construction.

This page is one of 73 entries in the Adhesive Tape & Glue division. Source facts available for cross-checking: Source model reference: Bitumen. Values shown are indicative and taken from the source catalogue where available. Final gauge, treatment, roll build and tolerances are confirmed on the technical datasheet issued with your quotation.

Technical datasheets (TDS), lot test reports / COA, MSDS and full export documentation are available for every grade; samples can be dispatched for standard items. Pricing depends on specification, quantity and schedule — request a quotation above.

Original supplier specification (source text, Chinese)
出售进口沥青 我司从伊朗原装进口的沥青,面向社会出售。 石油沥青 石油沥青是原油蒸馏后的残渣。根据提炼程度的不同,在常温下成液体、半固体或固体。石油沥青色黑 沥青马路 而有光泽,具有较高的感温性。由于它在生产过程中曾经蒸馏至400℃以上, 中文名称: 沥青 英文名称:Bitumen、Asphalt 来源:煤和石油 主要成分:沥青质和树脂 含量:99.48%。 外观与性状:常温下的沥青呈半固体或液体状态,颜色由黑褐色至黑色。非晶体。 沸点(℃): <470 相对密度(水=1): 1.15-1.25 闪点(℃): 204.4 引燃温度(℃): 485 爆炸下限%(V/V): 30(g/立方厘米) 溶解性:属于憎水性材料,它不透水,也几乎不溶于水、丙酮、乙醚、稀乙醇,溶于二硫化碳、四氯化碳、氢氧化钠 沥青制品 。 应用:在土木工程中,沥青是应用广泛的防水材料和防腐材料,主要应用于屋面、地面、地下结构的防水,木材、钢材的防腐。沥青还是道路工程中应用广泛的路面结构胶结材料,它与不同组成的矿质材料按比例配合后可以建成不同结构的沥青路面。 环境危害: 对环境有危害,对大气可造成污染。 燃爆危险: 本品可燃,具刺激性。 危险特性: 遇明火、高热可燃。燃烧时放出有毒的刺激性烟雾。 清除:如果衣服不小心染上沥青,可试用氢氧化钠清洗。 导电性能:绝缘体(常温下)。 CAS No.:8052-42-4 EINECS号:232-490-9
Where it is used

Typical applications

Common uses for this class of material. The final structure depends on your filling, printing and laminating conditions.

01

Masking and painting

Crepe masking tape for painting, automotive refinishing and surface protection.

02

Carton sealing

E-commerce, warehouse and export carton closure by hand or case sealer.

03

Labelling

Adhesive systems for self-adhesive label stock and barcode labels.

04

Mounting and bonding

Double-sided tape for signage, displays, foam and nameplate mounting.

05

Tape converting

Jumbo rolls for slitting and rewinding into finished retail rolls.

Before you enquire

Send these, get an exact quote

  • Target thickness and tolerance
  • Slit width and roll length
  • Core ID and maximum roll OD
  • Printing, laminating or sealing process
  • End use and any food-contact requirement
  • Monthly or per-order quantity
  • Destination port and required delivery date
Enquire About This Product
FAQ

Common questions

Can we print our logo on the tape?

Printed tape is available for volume orders. Send the artwork and repeat length, and we will confirm print method, colour count and cylinder / plate costs.

Can you slit to an exact width?

Yes. Give us the target width, tolerance, maximum roll OD and core ID, and we will confirm what the slitting setup can hold before quoting.

Do you supply samples?

Sample sheets and trial reels are available for standard grades. Tell us the application and the line you run so the sample is representative.

What do you need to quote accurately?

Thickness, width, roll length, quantity, application, printing or laminating process, destination port and target delivery date. A current datasheet helps us match an existing grade.

Get a Quote

Request a quotation and sample for Bitumen

Include thickness, width, application and monthly volume. An engineer replies within 24 hours with a grade recommendation, datasheet and firm quotation.

Quotation within 24 hours · No obligation · Samples available · Technical data on request