Technical notes

Notes from the specification desk.

Short, practical answers to the questions our engineers get most often. No trend pieces — just things that change an order.

2026-11-10 Specification

Thickness, density and grammage: the conversion buyers get wrong

Gram weight (g/m²) = thickness (µm) × density (g/cm³). A 40 µm BOPP film at 0.90–0.92 g/cm³ is about 36–36.8 g/m². The number is a yield estimate, not a purchase specification: thickness tolerance, corona treatment and slip additives all shift real roll yield. Always confirm with a cut-and-weigh sample from the actual lot.

2026-10-28 Application

What “12 micron cold laminating film” actually means

The phrase covers two different products: a thin BOPP thermal/soft lamination film used for print protection, and a pressure-sensitive cold laminating film with adhesive. At 12 µm the base film is very thin, so it suits labels, graphic overlays and print finishing — not structural food packaging. Ask for the construction, not just the thickness.

2026-10-12 Quality

Why a passing inspection still stops a production line

A film can meet every number on a COA and still cause tension re-adjustment on a high-speed line. Thickness distribution across the web, COF drift between lots and roll geometry at the unwind are rarely on the certificate. Specify the converting conditions, not only the material values.

2026-09-25 Export

Documents to request before the container sails

For a first shipment, agree the set up front: lot test report / COA, MSDS, technical datasheet, packing list, certificate of origin and — where direct food contact is involved — the correct FDA or EU declaration for your market. Mixed containers need one coherent document set, not one per supplier.

Get a Quote

Send us your question

Specification, converting or documentation questions — answered in writing by an engineer.

Quotation within 24 hours · No obligation · Samples available · Technical data on request